但凡事利與弊參半，正因?yàn)樾滦凸I(yè)快速門擁有很多項優異性能，裝備的配件種類繁多，偶爾出現一些小故障，影響產品本身的使用也在所難免。因此，小編為大家總結了一些工業快速門使用過程中因操作不當常見的問題及解決方法。

But everything has its pros and cons, precisely because the new industrial fast door has many excellent performances and a wide variety of accessories, occasional minor malfunctions that affect the use of the product itself are inevitable. Therefore, the editor has summarized some common problems and solutions caused by improper operation during the use of industrial rapid doors.

比如遇到一些常見的門體上升到頂部后無法下落等問題，可快速自行解決，節約售后維護時長，提升生產效率。

For example, when encountering some common problems such as the door body rising to the top and unable to fall down, it can be quickly solved by itself, saving after-sales maintenance time and improving production efficiency.

原因一：

Reason 1:

對門框兩側安裝的兩個射頻紅外線發射器受到撞擊或者其他外力影響出現位移，發射的紅外信號無法形成對射，會導致光電系統失效。

The two RF infrared emitters installed on both sides of the door frame may experience displacement due to impact or other external forces, resulting in the inability of the emitted infrared signals to form opposition and causing the failure of the photoelectric system.

解決方法：

Solution:

重新校正紅外線發射器位置，重新達到對射效果，即可解決問題。

Re calibrate the position of the infrared emitter to achieve the opposite effect, which can solve the problem.

原因二：

Reason 2:

門體下方地磁感應線圈感應到門框內有金屬物體存在，導致發出障礙物信號，門體將鎖定無法下落。

The geomagnetic induction coil below the door detects the presence of a metal object inside the door frame, causing an obstacle signal to be emitted, and the door will be locked and unable to fall.

解決方法：

Solution:

移除地磁感應線圈附近的金屬障礙物問題即可解決。

Removing metal obstacles near the geomagnetic induction coil can solve the problem.

原因三：

Reason Three:

微波雷達輻射扇形半徑范圍內有移動物體存在，導致發出障礙物光電信號，門體無法閉合。

The presence of moving objects within the fan-shaped radius of microwave radar radiation results in the emission of obstacle photoelectric signals, preventing the door from closing.

解決方法：

Solution:

清空微波雷達輻射半徑內的障礙物，問題即可解決。

Clearing obstacles within the radiation radius of the microwave radar can solve the problem.

如果遇到疑難雜癥或問題未解決等情況，應及時與售后聯系，售后人員會及時到現場檢測處理，或訪問綜合門業官網查詢解決辦法。

If encountering difficult and complicated problems or unresolved issues, it is necessary to contact the after-sales service in a timely manner. The after-sales personnel will promptly go to the site for testing and handling, or visit the official website of the comprehensive door industry to find solutions.