由于家中的車庫門使用非常的頻繁，所以有時候車庫門會出現一些這樣或那樣的問題，但是濟南車庫門維修又是件非常棘手的事，所以在當車庫門發生一些問題的時候我們該如何快速的解決呢？

Due to the frequent use of garage doors at home, sometimes there may be some problems with garage doors. However, maintenance of garage doors in Jinan is a very tricky task, so how can we quickly solve problems with garage doors?

1.檢查電源

1. Check the power supply

如果您家的車庫開門器沒有反應，您要做的就是檢查它是否正與電源相連接。您可以查看一下電源和車庫門的傳感器以及墻上的燈，看看它們是否通電。如果沒有，拔下插銷，然后再插一次，如果還沒有反應，可以去電閘箱檢查一下保險開關。

If your garage door opener is not responding, all you need to do is check if it is connected to the power supply. You can check the power supply, garage door sensors, and wall lights to see if they are powered on. If not, unplug the plug and plug it again. If there is no response, you can go to the power switch box to check the safety switch.

2.確保沒有上鎖

2. Ensure that it is not locked

有的時候車庫門打不開，可能是因為車庫開門器被鎖上了，這是車庫門的一個功能。您可以檢查安裝在墻上的車庫開門按鈕，在上面有個綠色的燈(有時這個燈可能在外殼內，需要用改錐將塑料外殼拆下才可以看到)。如果綠色按鈕在閃爍，就證明車庫門已經鎖上了。在這種情況下，只需按住“鎖定”按鈕幾秒鐘，直到綠燈停止閃爍，然后再次嘗試打開您的車庫門。

Sometimes the garage door cannot be opened, possibly because the garage door opener is locked, which is a safety feature of the garage door. You can check the garage door button installed on the wall, which has a green light on it (sometimes this light may be inside the casing and needs to be removed with a screwdriver to see it). If the green button is flashing, it indicates that the garage door has been locked. In this case, simply press and hold the 'lock' button for a few seconds until the green light stops flashing, and then try opening your garage door again.

3.傳感器

3. Safety sensors

在車庫門的下方都會有兩個傳感器，這個傳感器的作用是防止車庫門在關閉時夾到人或?qū)櫸铩＿@個傳感器是由一個紅外發射器和一個紅外接收器所組成，以確保每一次開關門都是的。

There are two safety sensors located below the garage door, which are designed to prevent people or pets from getting caught when the garage door is closed. This sensor is composed of an infrared transmitter and an infrared receiver to ensure that every door opening and closing is safe.

在這個傳感器上都會有指示燈，如果其中一個燈不亮了，傳感器可能會認為它探測到了車庫門的路徑上有物體，所以會導致車庫門一直關不上。一般來說，這種情況可能是由于傳感器被雜物擋住，或是兩個傳感器的位置有所偏移，沒有對齊。

On this safety sensor, there will be indicator lights. If one of the lights is not on, the sensor may assume that it has detected an object in the path of the garage door, which will cause the garage door to remain closed. Generally speaking, this situation may be due to the safety sensor being blocked by debris, or the positions of the two sensors being offset and not aligned.

接下來，沿著連接傳感器的電線一直向上排查，以確保它沒有損壞或切斷。

Next, follow the wire connecting the sensor all the way up to ensure it is not damaged or cut off.

如果您的車庫門還是關不上，馬達上的燈還在閃爍，傳感器可能還會“檢測”到有物品遮擋。您可以通過按住掛在墻上的車庫門按鈕來暫時關閉此功能(在確保關閉車庫是的之后)。如果您家的車庫門關得很好，而且確實沒有任何東西擋住傳感器，那么可能就是傳感器本發生了故障。

If your garage door still cannot be closed, the lights on the motor are still flashing, and the sensor may also "detect" an object blocking it. You can temporarily turn off this function by pressing and holding the garage door button hanging on the wall (after ensuring that closing the garage is safe). If your garage door is closed well and there is indeed nothing blocking the sensor, then it may be that the sensor has malfunctioned.

車庫門出現問題的檢查事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.kwy6.cn咨詢吧！

That's all we need to explain the inspection items for garage door problems. We hope you can be helpful. For more information, please visit our website http://www.kwy6.cn Consult!