卷簾門一般用于車庫，倉庫中，推拉門則多用于室內設計中，他們兩個在本質上有這區別，但是你知道嗎？它兩個的還有很多其他不同。下面濟南卷簾門廠家為您講解：

Rolling shutter doors are generally used in garages, warehouses, and sliding doors are mostly used in interior design. They are essentially different, but do you know? There are many other differences between the two. Next, Jinan roller shutter door manufacturer will explain to you:

卷簾門和推拉門的主要區別是卷簾門的主軸(俗稱束管)。卷簾門是一種將許多活動組合在一起的系列門。它在固定的滑道上上下旋轉，以它的頂部為中點，適用于各種店鋪。推拉門是基于平衡系統原理實現動態平衡，門體由外力(手動或電動)驅動在軌道系統中運行。適用于各類工廠、物流倉庫或特殊高保溫車庫。和審美要求。

The main difference between roller shutter door and sliding door is the main shaft of roller shutter door (commonly known as bundle tube). The rolling shutter door is a series of doors that combine many activities. It rotates up and down on the fixed slide, taking its top as the midpoint, and is applicable to all kinds of stores. The sliding door realizes dynamic balance based on the principle of balance system, and the door body is driven by external force (manual or electric) to run in the track system. It is applicable to all kinds of factories, logistics warehouses or special high insulation garages. And aesthetic requirements.

一般來說，推拉門的安裝工藝比卷簾門高，推拉門要水平上升。原理是門的多關節活動串聯，固定在滑軌上。門上方的卷軸是上下旋轉的中點，一個特殊的電機用來驅動卷軸的中軸旋轉。當達到滾動開關時，電機設置上限和下限位置。自動停止。為確保推拉門的穩定，這一類還將配備穩定保護裝置。

Generally speaking, the installation process of sliding door is higher than that of rolling shutter door, and the sliding door should rise horizontally. The principle is that the multi-joint movement of the door is connected in series and fixed on the slide rail. The scroll above the door is the midpoint of up and down rotation. A special motor is used to drive the central axis of the scroll to rotate. When the rolling switch is reached, the motor sets the upper and lower limit positions. Automatic stop. In order to ensure the stability of sliding doors, this category will also be equipped with stability protection devices.

車門底部裝有氣囊，在關門過程中遇到障礙物能自動倒車全開狀態。門底部?jī)啥搜b有葉片式鋼絲繩斷絲保護器。當提升鋼絲繩斷裂，門體加速時，該裝置能切入導軌，防止門體墜落。當電機裝有分離離合器裝置并切換到手動操作時，門體可以手動操作。

Airbags are installed at the bottom of the door, which can automatically reverse to the fully open state when encountering obstacles in the process of closing the door. Both ends of the door bottom are equipped with blade-type wire rope break protectors. When the lifting wire rope breaks and the door body accelerates, the device can cut into the guide rail to prevent the door body from falling. When the motor is equipped with a clutch release device and switched to manual operation, the door body can be operated manually.

推拉門還采用扭簧平衡系統，根據門的重載軟件計算設計，使平衡達到良好的狀態。扭簧采用60Si2MN進口彈簧鋼，使用壽命超過80000次。25.4實心圓鋼門，帶爬升平衡軸，平衡軸設有扭簧斷裂保護裝置，可防止平衡扭簧斷裂時門板掉落；提升滑輪是一個鋁制圓柱形滑輪。

The sliding door also adopts the torsion spring balance system, which is calculated and designed according to the heavy load software of the door, so that the balance can reach a good state. The torsion spring is made of 60Si2MN imported spring steel with a service life of more than 80000 times. 25.4 The solid round steel door is equipped with a climbing balance shaft, and the balance shaft is equipped with a torsion spring fracture protection device to prevent the door plate from falling when the balance torsion spring breaks; The lifting pulley is an aluminum cylindrical pulley.

卷簾門對于我們來說更加的方便便捷，它有電動的卷簾門，而推拉的門只能通過人力去解決。您對此有需求，可以隨時聯系我們選購http://www.kwy6.cn！

The roller shutter door is more convenient for us. It has an electric roller shutter door, while the sliding door can only be solved by manpower. If you have any demand, you can contact us at any time to purchase http://www.kwy6.cn ！